TECshow NAVIGATOR 3 Manual De Usuario página 9

8. Press and release the TAP SYNC/DISPLAY BUT-
TON (11) to return to normal operation.
Delete a Step
1. Press the PROGRAM BUTTON (6) for three
seconds to activate the Program Mode. The
LCD DISPLAY (3) will indicate program mode
by displaying a continuous flashing light next to
PROG.
2. Select the CHASE BUTTON 1 TO 6 (5) that con-
tains the step you would like to delete.
3. Press and release the TAP SYNC/DISPLAY BUT-
TON (11).
4. After selecting the TAP SYNC/DISPLAY BUT-
TON (11) use the UP and DOWN BUTTONS, to
manually scroll to the step you wish to delete.
5. When you have reached the step you wish to
delete, press and release the AUTO/DEL BUT-
TON (8).
Delete a complete chase
1. Press the PROGRAM BUTTON (6) for three
seconds to activate the Program Mode. The
8. DMX OPERATOR
Manual run scenes
1. When power is first turned on, the unit is in the
Manual Scene Mode.
2. Make sure AUTO & MUSIC BUTTON LED'S (8 &
9) are OFF.
3. Select the desired BANK using the UP and
DOWN BANK BUTTONS (4), that store the
scenes you wish to run.
4. Press the SCENE BUTTONS (2) to run the scene
you selected.
2. Press and hold down the AUTO/DEL BUTTON
3. While holding down the AUTO/DEL BUTTON (8)
4. Release the CHASE BUTTON (5). The chase
Delete all chases
This function will allow you to clear all chase mem-
ory (delete all chases).
1. Press and hold down the AUTO/DEL (8) and
2. While holding down the AUTO/DEL (8) and
3. Holding down the AUTO/DEL (8) and BANK-
PLAYBACK SCENES & CHASES
Manual run chases
This function will allow you to manually step
through all scenes in any Chase.
1. Press the PROGRAM BUTTON (6) for three
2. Execute a chase by selecting a CHASE BUTTON
3. Press the TAP SYNC BUTTON (11).
4. Use the BANK BUTTONS (4) to scroll through
LCD DISPLAY (3) will indicate program mode
by displaying a continuous flashing light next to
PROG.
(8).
press the CHASE BUTTON 1 TO 6 that you want
to delete twice. The chase should be deleted.
should be deleted.
BANKDOWN (4) BUTTONS.
BANKDOWN (4) BUTTONS disconnect the
power.
DOWN BUTTONS (4) reconnect the power and
hold for 3 seconds until the LED´s blink which
indicates all chase memory should be erased.
seconds to activate the Program Mode. The
CD DISPLAY (3) will indicate program mode by
displaying a continuous fast blinking dot next
to PROG.
1 TO 6 (5).
the chase.
P. 9
| Tecshow Navigator 3
English version