Protection From Overheating - Olimpia splendid CALDO TRENDY Instruccioes Para La Instalación, Uso Y Mantenimiento

Press key (SW6) or (T6) again: the function switches off and the appliance stops in the
chosen position.
The appliance is equipped with an overturning switch. If the appli-
ance is overturned, it automatically stops operation.
The appliance is equipped with a protection system from overheating which turns it
off if it overheats. In this case:
a. Switch the appliance off through the switch (6) and disconnect the power plug;
b. remove the possible cause (air intake grid clogged, obstacles in front of the air
outlet or inlet, etc.);
c. let the appliance cool down for 30 minutes;
d. restart the appliance.
If the issue persists, turn the appliance off, disconnect the plug from the power outlet
and please contact the retailer or the technical assistance service.
Before performing any cleaning or
maintenance intervention on the ap-
pliance, disconnect the plug from the
power outlet and wait for the hot parts
to cool down.
Use a dry cloth to clean the appliance and the re-
mote control.
If the appliance is very dirty, it is possible to use a cloth moistened with warm water (max
50°C) and a mild detergent to clean its external parts
Make sure the appliance is completely dry before reconnecting
the plug to the power outlet.
EN - 16

9.7 - Protection from overheating

10 - CLEANING
(figure 8) . Dry with a dry cloth.