Kobalt KHD 124B-03 Manual De Instrucciones página 10

OPERATING INSTRUCTIONS
3. Variable-speed Trigger Switch
a. Position the direction-of-rotation selector (E) to
the left or right of the tool as needed to unlock
the trigger switch (F).
b. To turn the hammer drill ON, depress the
trigger switch (F).
c. To turn it OFF, release the trigger switch.
Variable Speed
The variable-speed trigger switch delivers higher
speed with increased trigger pressure and lower
speed with decreased trigger pressure.
Electric Brake
The hammer drill is equipped with an electric
brake. When the trigger switch is released, the electric brake engages automatically to quickly
stop rotation.
4. Two-Speed Gear Box
The hammer drill has a two-speed gear box
designed for drilling or driving at two different
variable-speed ranges. The gear selector (D) is
located on the top of the hammer drill, allowing you
to select either "1" (Low) speed range or "2" (High)
speed range.
a. Setting "1" will deliver lower speeds and
increased power and torque. Use setting "1"
for heavy-duty work or driving screws.
b. Setting "2" will deliver higher speeds and
reduced power and torque. Use setting "2" for
drilling wood and wood composites and for
using abrasive and polishing accessories.
NOTICE: Never change gears while the tool is running. Failure to obey this caution could
result in serious damage to the hammer drill.
3
E
F
4
10
D