Kobalt KHD 124B-03 Manual De Instrucciones página 5

SAFETY INFORMATION
Some of the following symbols may be used on this tool. Please study them and their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL DEFINITION
V Volts
RPM Revolutions per Minute
Revolutions or Strokes
.../min
per Minute
" or in. Inch
N m Newton Meter
A danger, warning,
or caution. It means
'Attention! Your safety
is involved.'
General Power Tool Safety Warnings
WARNING
• Read all safety warnings, instructions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks, which may ignite the dust or
fumes.
• Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
Electrical Safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
SYMBOL DEFINITION
n No-load Speed
0
BPM Beats per Minute
Direct Current
or d.c.
in. lbs. Inch-Pound
To reduce the risk of injury, always
wear eye protection.
To reduce the risk of injury, user
must read instruction manual.
5