Install The Handles - KALLISTA P24490-CR Instrucciones De Instalación

INSTALLATION INSTRUCTIONS
Install the Handle Assemblies
‰ Ensure that the seal gasket or O-ring is installed to the underside of each of the handle assemblies.
For P24706: Apply a bead of 100% silicone sealant to the underside of the escutcheon.
For P24800: Apply a bead of 100% silicone sealant around the base of the handle assembly.
‰ Fit the valve assemblies through the top of the lavatory.
‰ Partially thread the screws into the rings.
‰ Install the washers and rings onto the valve assemblies. Thread the rings up the valve assemblies.
‰ Align the handles.
Optional for P24705: When installing Saint-Louis handles, align so the logo faces away from the spout when in the
OFF position.
‰ Tighten the screws. Do not overtighten!
1491057-2-A
4 of 20

2. INSTALL THE HANDLES

Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Lavatory Faucet
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.