Explanation Of The Symbols; Safety Instructions - Batavia BT-CRW001 Manual De Usuario

Dear customer
Please familiarize yourself with the proper
usage of the device by reading and follow-
ing each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read all safety instructions!
This manual contains important informa-
tion on operating and handling the device.
Keep these operating instructions for fur-
ther reference. Please pass it on along with
the unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under
art. No: 7064221 (2Ah). The charger is avail-
able separately under art. No: 7064222
(2.4A) or 7064223 (0.4A).
These items are available online and in
participating stores.

1. Explanation of the symbols

The following symbols are used in the user
manual or on the product:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury,
loss of life or damage to the tool in
case of non-observance of the
instructions in this manual.
Always wear hearing protection.
The effects of noise can cause
hearing loss.
Wear safety glasses. When
working with electric power tools,
sparks, splinters, chips and dust
particles may be generated and
these can cause loss of sight.
Wear safety gloves!.
Variable speed control.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the
manufacturer confirms that this
Electric tool complies with the
applicable European directives.
Do not dispose of electric power
tools with domestic refuse.
2. Machine specific safety warn-
ings for cordless ratchet wrench
• Wear hearing protection when impact
screwing. Exposure to loud noise can
lead to hearing loss.
• Secure the workpiece! A workpiece
securely held by a clamping device or
vice is much safer than one held in your
hand.
• Hold the power tool firmly. High torques
can occur for brief periods while tight-
ening and loosening screws.
• Wait until the power tool has come to a
stand-till before putting it down. The
tool can jam his leading to loss of con-
trol of the power tool.
• Hold the power tool by insulated grip-
ping surfaces, when performing an
operation where the fastener may con-
tact hidden wiring. Fasteners contact-
ing a "live" wire may make exposed
metal parts of the power tool "live" and
could give the operator an electric
shock.
• Always be sure you have a firm footing.
Be sure no one is below when using the
tool in high locations.
• Wear ear protectors. Exposure to noise
can cause hearing loss.
• Check the impact socket carefully for
wear, cracks or damage before
installation.
• Keep hands away from rotating parts.
• Do not touch the ratchet head, impact
socket, bolt, nut or the workpiece imme-
diately after long time operation. They
may be extremely hot and could burn
your skin.
• Use protective equipment. Always wear
safety glasses when working with the
machine. The use of protective clothing
is recommended, such as dust mask,
protective gloves, sturdy non-slip foot-
wear, helmet and ear defenders.
English
5