Safety Notice - INTERSPIRO INCURVE-E Manual De Usuario

INCURVE-E
U S E R M A N U A L
B rea t h i ng Ap pa ra tus wit h Dig ita l D isplay
Wi rel ess H ea ds-Up Display
This product, supplying breathing air to the user, has been tested in accordance with
EN 137 Type 2, and is to be used according local regulations.
Manufacturer:
Interspiro AB
Box 2853, 18728 Täby, Sweden.
INCURVE-E consists of:
• Breathing Apparatus Computer (BAC)
• Digital Display located at the pressure gauge
• INCURVE Breathing Apparatus
• Optional Heads-Up Display (HUD) located inside the face mask
• Optional fully integrated Automatic Distress Signal Unit (ADSU) / Personal Alert
Safety System (PASS)
1 SAFET Y NOTICE
The product must only be used with Interspiro cylinders:
Spirolite 3.4L, 6.7L, cylinder pack 323.4 or 326.7
Composite 6.8L or 9.0L
Steel 4L or 6L.
ATTENTION! BREATHING APPARATUS WITH TWIN CYLINDER AND CYLINDER PACK CONFIGURATIONS: SPIROLITE 6,7L OR
326,7, COMPOSITE 6,8L AND STEEL CYLINDERS 4L OR 6L, EXCEEDS THE TOTAL WEIGHT LIMIT ACCORDING TO 6.6 IN EN
137:2006.
The product must only be used by personnel in good health and trained in the use
of respiratory protective equipment. Individuals with beards or large sideburns may
not obtain an adequate seal. The apparatus must be maintained, serviced and tested
as described in this user manual, Interspiro service manuals and Interspiro test
instructions.
INTERSPIRO IS NOT RESPONSIBLE FOR
COMBINATIONS OF PRODUCTS, UNLESS PUT TO MARKET BY INTERSPIRO
CHANGES OR ADAPTATIONS MADE TO THE PRODUCT BY A THIRD PARTY
7