Auto-Restart Function - Airton 409730 Manual De Instalación

EN
AUTO-RESTART & MANUAL START FUNCTIONS

AUTO-RESTART FUNCTION

The air conditioner automatically saves the last
selected settings after a power failure or drop, and
automatically restarts with these settings when power
is restored. This function cannot be disabled.
MANUAL START FUNCTION
The manual start function allows the air conditioner to be
started if the remote control is lost, unavailable or
malfunctions.
The auto button located on the right side under the front panel,
allows to start and stop the air conditioner, if needed and only
in case of problem with the remote control.
The air conditioner will automatically start in Auto mode (see
remote control manual).
In Auto mode:
- Depending on the indoor and outdoor ambient temperatures,
the air conditioner will automatically adjust the heating or
cooling modes and the fan speed.
In Auto mode:
- The temperature cannot be adjusted and will therefore not be
displayed on the display.
Use a small screwdriver to press the button to turn the air
conditioner on or off.
48
Auto button
18