Fitting The Nozzle - Oase PondJet Eco Instrucciones De Uso

Fitting the nozzle

Multifunctional nozzle
How to proceed:
1. Unscrew the plug and remove together with the cover disk and both O-rings.
2. Screw in the plug with O-ring and tighten.
– The outlets of the multifunctional nozzle are now uncovered.
Optional nozzle
Connection: 25 mm (1 ")
How to proceed:
1. Unscrew the plug with O-ring and remove.
2. Screw in the optional nozzle with O-ring and tighten.
– The nozzle is now ready for use and the outlets of the multifunctional nozzle are closed off
with the cover disk.
26
PJT0004
PJT0005