Timer Function - Taurus V302MT Instrucciones De Uso

Make sure that the controls are kept clean and dry and that there are no objects covering them
(e.g., a kitchen utensils or cloths). Even a thin coating of water can make the controls difficult to
operate.
COOKWARE
It is important to only use metal pots and pans specifically designed and/or approved for use on
vitro-ceramic hobs. Never allow melamine or plastic containers to come into contact with the
heated areas.
Do not use cookware with uneven edges or convex bases.
Make sure that the base of the cookware is smooth, sits flat on the hob and is the same size as
the cooking area. If smaller diameter cookware is used, efficiency may be lower than expected.
Always place the cookware in the centre of the cooking area.
Always lift the cookware, do not slide it as this may scratch the glass.

TIMER FUNCTION

The appliance's operating time can be controlled up to 99 minutes.
1 Select the corresponding cooking area by using the corresponding area selection button
2 Press the timer selection control
3 To program in an operating time, simply use the sliding control or the + - buttons to change the
timer setting. The set time or time remaining will appear on the display. Use the sliding control or
the + - buttons to change the timer setting.