Display Panel - Fellowes AP-230PH Manual Del Operador

1
1. MANUAL FAN SPEED
ADjUSTMENT - Press the + or –
buttons to manually adjust fan speed to
low, medium, high, turbo or auto speed.
2. AIR QUALITY LIGhT INDICATOR -
Green, yellow, and red lights indicate
the purity of your air.
3. FAN SPEED INDICATOR -
Shows current fan speed setting: low,
medium, high or turbo speed.
4. AUTO MODE - The unit is set to default
to automatic operation when it is first
turned on. Air purity sensor monitors
the air and automatically adjusts the
fan speed to keep your air purified. To
go back to auto at any time, press "–"
several times until auto lights up.
5. PlasmaTRue™ TecHnoloGY -
Safely removes airborne pollutants at
the molecular level instantly neutralizing
viruses and bacteria in the air. Light
indicators show PlasmaTRUE™
Technology in action!
DISPLAY PANEL AP-230Ph/AP-300Ph
4
2
5
3
6. CARBON FILTER
ChANGE INDICATOR - The red
indicator light will signal when to replace
filter. (Recommended to replace filter
every three months under normal usage
conditions.) For replacement filters, see
page 4.
7. TRUE hEPA FILTER ChANGE
INDICATOR - Green, yellow and red
light indicate when to replace filter. The
red indicator lights will signal when to
replace filter. (Recommended to replace
filter every twelve months under normal
usage conditions.) For replacement
filters, see page 4.
8. POWER BUTTON - This unit is set to
default to automatic operation when
it is first turned on. The air purifier will
automatically sense the amount of
impurities in the air, and adjust the fan
speed accordingly.
7
6
7
8