Assembly - Breville the Puck Sucker BEA503 Manual De Instrucciones

Assembly

INSTALLING & REMOVING
THE 9V BATTERY
1. Holding the container on one hand,
pull upwards to remove the lid with the
other hand.
2. Using a Philips-head screwdriver, unscrew
the battery cover, found underneath.
3. Carefully set aside the battery cover with
the screw.
4. Insert the 9V battery, bottom side up, and
align the male (positive) connector to the
side of the screw lock.
5. Replace the battery cover and screw back
to close.
6. Secure the lid back to the container.
EN
7