Preparatory Works - Zizito AMADEO Manual Del Usuario

4. PREPARATORY WORKS

4.1. Preparatory work of the ISOFIX
If your vehicle is not equipped with ISOFIX guide sleeve, please fix the ISOFIX
guide sleeve first, as shown in Fig. 1. To fully release the ISOFIX connectors,
simply pull the ISOFIX releasing handle 3a outwardly, refer to 3b in Fig. 2.1.
To retrieve the ISOFIX connector, pull and hold the ISOFIX releasing handle
3c with one hand and pushing the ISOFIX connectors with the other hand,
refer to 3d in Fig. 2.2.
3a
3b
.
3c
3d
.
4.2. Adjusting the harness and headrest (group 0+ I)
Push the "CFA button", to loose the harness belts as much as possible, as
shown in Fig. 3. Hold the handle behind the headrest, which can unlock
the headrest, as shown in Fig. 4. Lift up or down the headrest, to make the
shoulder belt located in same horizontal line with the shoulder of the child, as
shown in Fig. 5
25