Zizito AMADEO Manual Del Usuario página 33

7. CHILD SAFETY BELT DISASSEMBLE
7.1. Remove the child safety seat
Firstly push the top tether button to loose the strap. Then unhook the top teth-
er from the vehicle. Hold the ISOFIX release button, pull the seat body to be
apart from the vehicle. If necessary, open the buckle of the 3-point belt. Then
unbuckle the harness to take the child out from the child safety seat.
7.2. Remove the harness
Press the CFA button to loose it,
as shown in Fig 35. Adjust the
headrest to the lowest position, as
shown in Fig 36.
Press the rear lid button to open
the back cover of the chair, as
shown in Fig 37. Take the two
shoulder straps out from the iron
plate, as shown in Fig 38.
Put the iron plate down to the bot-
tom of the seat, as shown in Fig
39. Make the two shoulder straps
unworn by the rod, as shown in
Fig 40
33