Troubleshooting Guide - UFESA FLEXY-HEAT CIE Manual De Instrucciones

TROUBLESHOOTING GUIDE

Possible operational problems
PROBLEM
After turning on the electric blanket, it does not
warm up or only heats up a little.
After a certain operation time, the product
temperature seems to reduce.
The regulator control does not turn on when the
switch is activated.
PRODUCT DISPOSAL AND CONSERVATION
PRODUCT CONSERVATION
Unplug the product when you do not intend to use
it for an extended period of time to prolong its
shelf-life. Prior to storing the product, allow it to
cool before folding, keep it in its original packaging
in a dry location with the fewest possible folds,
without placing any objects on top.
RECOMMENDATION
Make sure that the regulator is properly
connected to the product.
If the electric blanket is not heating up, cover it
with a bed cover, or duvet, placing the regulator
in the maximum position and wait for 30
minutes. If it continues to not heat up after this
time, contact an authorized service technician.
Checks carried out with the electric blanket
partially uncovered or in the open air are not
reliable, as these may result in erroneous
perceptions of the heat.
The product has an auto-stop system that
activates after 3h of continuous operation. After
this time, the light on the regulator starts to
flash. If you want to continue to use it, change the
temperature level to level 0, wait a few seconds,
and then select the desired temperature.
Ensure that the regulator is properly connected
to the product and that there is voltage in the
socket of the mains used ,and that the product
is properly plugged in to the same.
19