Description Of The Components - Melchioni Family STORM Folleto De Instrucciones

becomes indispensable, they must comply with current safety standards and their current
capacity (amperes) must not be less than the maximum of the device.
•
Position the stove away from other heat sources, from flammable materials (curtains, tapestries,
etc.), from flammable gases or explosive material (spray cans) and from materials that can
deform with heat. Check that the free space is 120 cm from the front and 50 cm from the sides
and back.
•
The support surface must be stable, wide (shelves are to be excluded), not sloping (as the
appliance could overturn), and without rough edges for the safety switch located in the base to
work correctly: this switch stops operation if the stove overturns.
•
Make sure that the cable is positioned correctly and that it is not in contact with hot parts or
sharp edges, nor wrapped around the appliance or twisted on itself and does not get caught, in
order to avoid a fall of the appliance. Make sure that you cannot trip over it, to avoid accidental
falls or personal injury. Also check that the cord is not under carpets
•
In the event of a breakdown or malfunction, switch off the appliance and have it checked by
professionally qualified personnel; repairs carried out by unqualified personnel can be
dangerous and void the warranty.

DESCRIPTION OF THE COMPONENTS

USE
1. Before inserting the plug into an electrical outlet, make sure that the power supply in your area
corresponds to that on the product label.
2. Carefully remove the appliance from the plastic bag and from the cardboard.
3. Place the appliance on a flat and stable surface and insert the power cable into an AC220-240V
electrical outlet. Turn the operation button to ON and the display will light up