Makita GRH08 Manual De Instrucciones página 15

2. Hold the attachment unit of the dust cup set and
pull it apart from the tool.
1
Fig.30
► 1. Attachment unit
NOTE: If the cap comes off from the dust cup set,
place it back to the original position.
1. Detach the bellows from the attachment unit of the
dust cup set.
1
Fig.31
► 1. Bellows 2. Attachment unit
2. Set the cap back in place with its printed side
facing upwards.
4
2
Fig.32 1
► 1. Cap 2. Printed side 3. Grooves 4. Lips of upper
opening 5. Attachment unit
2
5
3
15 ENGLISH
3. Be sure that the grooves around the cap well fit in
the lips of the upper opening of the attachment unit.
Fig.33
DUST COLLECTION
SYSTEM
Optional accessory
The dust collection system is designed to collect dusts
effectively when the concrete drilling operation.
1
Fig.34
► 1. Dust collection system
CAUTION:
The dust collection system is
intended for drilling in concrete only. Do not use
the dust collection system for drilling in metal or
wood.
CAUTION:
When using the tool with the dust
collection system, be sure to attach the filter
to the dust collection system to prevent dust
inhalation.
CAUTION:
Before using the dust collection
system, check that the filter is not damaged.
Failure to do so may cause dust inhalation.
CAUTION:
The dust collection system col-
lects the generated dust at a considerable rate,
but not all dust can be collected.