Makita GRH08 Manual De Instrucciones página 14

Dust cup set
Optional accessory
CAUTION:
Before installing and uninstalling
the dust cup set, remove a bit from the tool.
Installation
For model GRH08
1. Attach the spacer to the attachment unit of the
dust cup set aligning the
unit with one of the grooves in the spacer.
2
3
1
Fig.25
► 1. Spacer 2. Dust cup set 3. Attachment unit
4. symbol 5. Groove
2. Place the dust cup set with the spacer onto the
barrel neck of the gear housing aligning the
on the dust cup set with one of the grooves in the barrel.
Then hold the attachment unit of the dust cup set and
push it down onto the barrel to secure it in place.
1
Fig.26
► 1. Dust cup set 2. Attachment unit 3. Spacer
4. symbol 5. Groove
symbol on the attachment
symbol
2
3
For model GRH09
Place the dust cup set onto the barrel neck of the gear housing
aligning the symbol on the dust cup set with one of the
grooves in the barrel. Then hold the attachment unit of the dust
cup set and push it down onto the barrel to secure it in place.
1
2
4
5
Fig.27
► 1. Dust cup set 2. Attachment unit 3.
NOTE: If you connect a vacuum cleaner to the dust
cup set, remove the dust cap before connecting it.
1
Fig.28
► 1. Dust cap
4
Uninstallation
5
1. Push the chuck cover down all the way and pull a bit off.
Fig.29
► 1. Bit 2. Chuck cover
14 ENGLISH
symbol 4. Groove
1
2
3
4