Ariston SMART II Manual Del Usuario página 27

GB
(VENTILATION)
Press the ON-OFF button on the remote con-
trol.
Press the MODE button to select the VENTI-
LATION mode, the symbol "
up on the display screen.
This mode circulates air throughout the
room. Press the FAN button to set the fan
speed to high, med or low.
(COOLING)
Press the ON-OFF button on the remote con-
trol.
Press the MODE button to select the COOL-
ING mode, the symbol "
the display screen.
In this mode, the air conditioning unit cools
down the room while at the same time reduc-
ing the humidity in the air.
Set the desired room temperature using the
▲ ▼
or buttons.
Example: If the temperature in the room is
28° C, you should set a temperature below
27° C for the compressor to start and cooling
to begin.
Press the FAN button to set the fan speed to
automatic, high, med or low.
(FOLLOW ME)
Press the FOLLOW button to activate the
function. This symbol "
display.
The operation of the air conditioning unit now
depends on the sensor of the remote control,
which detects the actual room temperature
of the environment it is located in. To deac-
tivate the function press the FOLLOW button
again.
26
" will come
" will come up on
" appears on the