Operating Modes; Methods Of Using The Buttons - Ariston SMART II Manual Del Usuario

GB

OPERATING MODES

(AUTO)
Press the AUTO button to select the auto-
matic mode regardless of whether the unit is
on or off; the symbol "
display.
In this mode, the temperature and speed of
the fan are set automatically based on the
room temperature detected.
- if the room temperature drops below 21°C,
the heating cycle begins and stays on until
the temperature rises above 22°C.
- if the room temperature is between 21 and
23°C, the fan cycle begins and stays on un-
til the temperature rises above 23°C.
- if the room temperature is between 23 and
26°C, the dehumidifi cation cycle begins
(the room temperature drops by 1.5°C after
about 3 minutes of operating).
- if the room temperature rises above 26°C,
the cooling cycle begins and stays on until
the temperature drops below 26°C.
The temperature, the air fl ow and the direc-
tion are automatically controlled.
However, if the temperature is not comfort-
▲ ▼
able, the or
a decrease or increase of max 7C° with the
remote control.
Press the FAN button to set the fan speed
to automatic, high, med or low. Press the
SWING button to set the angle of the fl ap
vertical defl ector in a way to change the air
fl ow's direction. By pressing it again, the de-
fl ector stops moving.
The AUTO function is not active in TURBO
mode.
24
" appears on the
buttons can be used to set