HOMCOM 820-294V90 Manual De Instrucciones página 8

8.The temperature setting is 00,machine will keeping working.
Weekly timer setting
1.After plugging in the power supply, turn on the power switch, the product buzzer
call and show the environment temperature. The product is in standby mode.
2.press the setting button to enter the Current actual time setting mode. press
"add" and "reduce" to adjust time. Click "ok" key when the time is chosen in every
time. Press the cancel key to return to the previous step, double-click the Cancel
button to return to standby mode, or cancel the week timing.
3.After the confirmation of the actual time, the Sun (Sunday) is flashing on the top of
the screen. Click the up and down keys to choose the actual days of today. After
selecting the actual day of today, such as Mon (Monday), press the confirmation
button. At this time Mon is often bright, press up and down key to set time of
Monday opening time, after finished opening time, press up and down key to set
closing time. After finished closing time, press up and down to set temperature you
want in the Monday. The rest of the day is done according to this procedure until
one week is complete. If you choose the working time at 00 and press the
confirmation button, that is, choose not to work in this day of week.
4.When the week timer is set, the regular product working will not affect the timing
of week time when week time is not working. If the time is open at the weekly time,
but the product is still in regular working, the week time will be fail. During the week
timer of product working, if any key on the remote control and product are pressed ,
week timer is also invalid on that day. The product is directly shut down and can
only be reorganized or set up. After setting the week timer, the screen will be
displayed according to the regular working mode. After regular working shutdown,
restore the week timer standby time. Press the Cancel button two times, or turn off
the power switch, or pull out the power cord, or power failure. You need to reset it.
7