sunjoe 24V-HCSWP-CT Manual Del Operador página 11

Hand-held Pruning Saw Assembly
1. To configure the machine as a hand-held pruning saw, align
the small ridge on the removable battery compartment
with the guide slot on the handle, then slide the removable
battery compartment upward into the handle until it clicks
into position (Fig. 4).
Fig. 4 Handle
Removable battery compartment
2. Insert the battery into the removable battery compartment
until the push lock buttons click into place (Fig. 5).
3. To take the removable battery compartment off of the
hand-held pruning saw, press the locking button on the
removable battery compartment and slide it out of the
handle (Fig. 6).
Fig. 6 Handle
Locking button
Fig. 5
Push lock button
Pole Pruning Saw Assembly
1. To install the pole, align the small ridge on the end of the
pole assembly with the guide slot on the handle, slide the
pruning saw downward into the pole assembly until it clicks
into position (Fig. 7).
Fig. 7
Pole
assembly
2. Latch the locking latch over the hook on the end of the
handle, then press the latch lock down to secure the
connection (Fig. 8).
Fig. 8
Latch lock
3. Slide the removable battery compartment and battery into
the end of the pole assembly, until it clicks into position
(Fig. 9).
Fig. 9
11
Locking latch
Pole assembly
Removable battery
compartment + battery