Safety Symbols - sunjoe 24V-HCSWP-CT Manual Del Operador

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all
instructions on the machine before attempting to assemble and operate.
Symbols
READ THE OPERATOR'S
MANUAL – Read, understand,
and follow all instructions in the
user manual before attempting to
assemble and operate.
WEAR EYE AND HEARING
PROTECTION – For protection
against injury, wear ear defenders
and safety goggles.
Wear protective gloves and non-slip
footwear when using the machine
and handling debris.
The moving part will continuously
run for several seconds after you
turn off the machine.
50 ft
WARNING! SHOCK HAZARD –
(15 m)
Keep at least 50 ft (15 m) away
from power lines. Do not overreach.
Keep proper footing and balance at
all times.
Only use the battery
charger indoors.
Descriptions Symbols
SAFETY ALERT – Indicates a
precaution, a warning, or a danger.
WARNING! Do not expose the unit
to rain or wet conditions. Keep dry.
CAUTION! Avoid contact between
the tip of the guide bar with any
object. Contact with the tip of the
m
guide bar may cause the chain
saw to kickback, which may cause
serious injury to the user.
Correct direction of cutters.
DANGER! ROTATING BLADES
– Keep hands and feet away from
openings while the saw is running.
Keep bystanders a minimum
distance of 50 ft (15 m) away from
the work area.
7
Descriptions