Troubleshooting
Checkpoints
If you encounter an issue with the dishwasher, first check the table below and try the
suggestions.
Symptom
The dishwasher does
not start.
The dishwasher has
bad odours.
Water remains in the
dishwasher after a
cycle has finished.
DW8500AM_DW60A8070BB_EF_DD81-03206D-03_EN.indd 69
Possible cause
The door is not completely
closed.
The power cord is not
connected.
Water is not being supplied.
The control panel is locked.
Water remains from the
previous cycle.
The drain hose is folded or
clogged.
Action
• Make sure the door is
latched and completely
closed.
• Make sure the upper rack
is properly joined with the
nozzle.
• Make sure the upper rack is
properly assembled.
• Connect the power cord.
• Make sure the water supply
valve is open.
• Deactivate the Control Lock.
• With the dishwasher empty,
add detergent, and then
run the Quick cycle. This is
available only on applicable
models.
• Straighten and unclog the
hose.
English
69
2021-08-10
1:37:52