nedis ANIR0502BK Guia De Inicio Rapido página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
ANIR0502BK_MAN_COMP_print_1022.indd 6
ANIR0502BK_MAN_COMP_print_1022.indd 6
• Keep the antenna away from the sources of
interference: keep the antenna away from those
big power consumption devices, such as air
conditioner, elevator, hair dryer and microwave
oven.
• Place the antenna near windows when using the
antenna in indoor environment.
• Install the antenna as high as possible: In digital
terrestrial reception, interceptions between
antenna and transmission tower will cause signal
loss temporarily. Please install the antenna as high
as possible to reduce interceptions.
Installation: DTV set-top-box (image B)
1. Take out the antenna main unit and accessories
from box.
2. Connect the coaxial cable with antenna and DTV
set-top-box.
3. Connect the DTV set-top-box to your TV. Please
make sure the coaxial cable powering function
of your STB is ON. (Please check the operational
manual of your STB for coaxial cable powering
function).
4. Check the LED on the antenna. If the LED is not
lighted on, Please go back to step 3.
5. Adjust the antenna in the best position that can
receive digital TV signal. (It is recommended to
place the antenna near the window where the
digital TV signal comes in).
6. Organize the coaxial cable for neat, tidy and safety.
After the installation is finished, you can use your
4
set-top-box to check the signal strength and
quality. If you cannot have a steady picture, please
move the antenna to a better reception position.
When you find the best position, please fix it.
6
10-10-2022 08:26:50
10-10-2022 08:26:50

Publicidad

Tabla de contenido
loading

Tabla de contenido