Cleaning And Care; Parts And Specifications - Orbegozo PHE 50 Manual De Instrucciones

PHE 50 PHE 70
TO TURN OFF THE HEATER
1. Turn the variable control knob to pilot position.
2. Press and turn the variable control knob to OFF position.
3. Turn off the valve on the gas supply cylinder completely.

CLEANING AND CARE

Wipe off powder coated surfaces with soft, moist rag. For lacquer surface, use suitable
cleaners. Do not clean heater with cleaners that are combustible or corrosive.
Remove debris from the burner to keep it clean and safe for use.
STORAGE
1. Always close the gas valve of the gas cylinder after use or in case of a disturbance.
2. Remove the pressure controller and the hose.
3. Check the tightness of the gas valve and for damage. If you suspect a damage, have it
changed by your gas dealer.
4. Never store liquid gas cylinder in a sub-terrain, or at places without adequate air ventilation.

PARTS AND SPECIFICATIONS

A. Construction and characteristics:
Transportable terrace/garden heater with tank housing
Casing in steel with powder-coating or stainless steel
Soluble gas connections are equipped with metal clamp
Stainless steel flame screen
Heat emission from reflector
B.Specifications
For outdoor use only
Uses propane or butane gas only
Max. wattage: 12000 watts
Min. wattage: 5000 watts
Consumption: 450 g/hr – 870 g/hr
Weight: Stainless steel model G.W. 20 kgs
Powder coating model G.W. 22 kgs
Height: 2210 mm including stand
With CE certificate
16