Engine Oil - benza BZ1000iS Manual De Instrucciones

ENGINE OIl

NOTICE
The generator has been shipped without engine oil. Do not start the engine until it is
filled with the sufficient engine oil.
1. Place the generator on a level surface.
2. Remove the screws 1, and then remove the cover 2.
3. Remove the oil filler cap 3.
4. Fill the specified amount of the recommended engine oil, and then install and
tighten the oil filler cap.
5. Install the cover and tighten the screws.
Recommended engine oil: SAE SJ 15W-40
Recommended engine oil grade: API Service SE type or
higher Engine oil quantity: 1kW: 0.31L / 2kW: 0,35L
I 19