Muffler Screen And Spark Arrester - benza BZ1000iS Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTICE
Do not wring out the foam element when squeezing it. This could cause it to tear.
· Insert the foam element into the air filter case.
TIP: Be sure the foam element sealing surface matcher the air filter so there is no air leak.
The engine should never run without the foam element; excessive piston and cylinder wear may result.
· Install the air filter case cover in its original position and tighten the screw.
· Install the cover and tighten the screws.

mUFFlER sCREEN AND sPARk ARREsTER

WARNING
The engine and muffler will be very hot after the engine has been run. Avoid touching the engine and muffler while they
are still hot with any part of your body or clothing during inspection or repair.
· Remove the screws 1, and then pull outward on the areas of the cover 2 shown.
34
I
Original Instruction

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bz2000is

Tabla de contenido