Alternating Current (Ac) Connection - benza BZ1000iS Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

AlTERNATING CURRENT (AC) CONNECTION

WARNING
Be sure any electric devices are turned off before plugging them in.
NOTICE
· Be sure all electric devices including the cables and plug connections are in good condition before connection to the
generator.
· Be sure the total load is within generator rated output.
· Be sure the receptacle load current is within receptacle rated current.
TIP: Make sure to ground (Earth) the generator. When the electric device is earthed, the generator must also be earthed
1. Start the engine.
2. Turn the ESC to "ON".
3. Plug in to AC socket.
4. Make sure the AC pilot light is on.
5. Turn on any electric devices.
TIP: The ESC must be turned to "OFF" to increase engine speed to rated rpm. If the generator is connected to multiple
loads or electricity consumers, please remember to first connect the one with the highest starting current. and finally
connect the one with the lowest starting current.
24
I
Original Instruction

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bz2000is

Tabla de contenido