Understanding The "Settings" Sub-Menu; Selecting The Display Language - HURNER HCU 300 Manual De Instrucciones

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
arrow keys to select the desired set-up option. Use the ð ar-
row key to toggle between „on" and „off" for that set-up
option.
If a "M" is shown next to a set-up option, this indicates that
a sub-menu is accessible here by pressing the MENU key.
Press the START/SET key to confirm the set-up and save it to
memory.
10.1

Understanding the "Settings" Sub-menu

"Check Code Expiry on" means that the welder identifica-
tion code has to be current and not expired (default pe-
riod of validity 2 years from code issuance), or the weld-
ing operation cannot be started, "off," that the validity
of the code is not checked at all.
"Memory Control on" means that when the system memory
is full of reports, the unit will be blocked until the re-
ports are printed or downloaded, "off," that it works
but that the oldest report will be overwritten.
"Manual Input on" means that the manual input of weld-
ing parameters (see Sect. 7) is possible, "off," that the
manual input is not allowed.
"Welder Code Options – M – " means that by pressing the
MENU key, the user can access a sub-menu that allows
determining when the welder code, if it is enabled at
"Recording," has to be entered:always, i. e. before evey
single welding operation, only before the first welding
operation after switching the unit on or only after the
first welding operation of a new day/date.
"Language – M – " means that by pressing the MENU key,
the user can access a sub-menu for selecting the display
and report language (see Sect. 10.1.1).
"Date/Time – M – " means that by pressing the MENU key,
the user can access a sub-menu for setting the clock (see
Sect. 10.1.2).
"Buzzer Volume – M – " means that by pressing the MENU
key, the user can access a sub-menu for setting the vol-
ume of the status buzzer (see Sect. 10.1.3).
"Temperature Unit – M – " means that by pressing the
MENU key, the user can access a sub-menu for selecting
centigrade or Fahrenheit as the unit for the tempera-
ture.
"Inventory Number – M – " means that by pressing the
MENU key, the user can access a sub-menu for entering
the number under which the unit is inventorized with
the operating company.
10.1.1

Selecting the Display Language

When the "Select Language" sub-menu was selected, the
screen changes and the display reproduced in Display 17 ap-
pears.
Version September 2022 HÜRNER HCU 300 User's Manual
Settings
>Check Cd Expiry on
Memory Control off
Manual Input on
Display 14
Settings
Wldr Code Option-M-
>Language -M-
Date/Time -M-
Display 15
Settings
>Buzzer Volume -M-
Temp. Unit -M-
Inventory No. -M-
Display 16
**** LANGUAGE ****
>Deutsch
English
Francais
Display 17
EN
19