Toyotomi KR-47 Instrucciones De Uso página 11

MANUAL
A
INSTALLING THE HEATER
1
Carefully remove your heater from the box and check the contents. In additi-
on to the heater you also need to have:
¼ a manual fuel pump
¼ the drip tray
¼ these directions for use
Keep the box and the packaging materials for storage and/or transportation.
2
Remove the packaging material from the grill ¶ (Fig. A, B, C).
!
Risk of fire. The packing materials are flammable.
3
Loosen the screw on the drip tray (Fig. D). Place the heater housing on the
base plate, insert the fuel tank and attach it with a screw to the base plate.
Tigten the screw.
!
Do not operate your heater without the drip tray.
4
Fill the fuel tank as indicated in Section B.
5
Insert the batteries into their holder µ at the back of the heater (Fig. E).
Ensure that the positive and negative poles match the + and - marks indicated
on the battery housing. It is best to use new alkaline batteries (2x D-size).
Replace the battery holder.
6
The floor should be firm and completely level. Reposition the heater, when it is
not level. Do not correct the situation by placing books or other goods under
the heater.
7
Your heater is now ready for use.
!
Do not use the heater at a height of over 1500 meters.
B
FILLING FUEL
Do not fill the fuel tank in the living room, but in a more suitable place (there can
always be some spillage). Follow the procedure below:
1
Make sure that the heater is switched off.
2
Insert the straight tube of the manual fuel siphon into the paraffin container.
Remove the fuel tank cap ¹ on the heater (Fig. F), and insert the siphon's flexi-
ble hose into the fuel tank opening (Fig. G).
3
Lock the valve on top of the pump (turn clockwise).
4
Squeeze the pump a few times, until fuel starts flowing into the fuel tank.
As soon as this happens, there is no need to press any longer.
A
B
C
D
E
F
G
F E
4
5