Pre-Installation Requirements - EcoFlow 100 W Rigid Solar Panel Manual De Instrucciones

Note:
1. Do not step, walk, stand or jump on any module, as uneven stresses may impact the micro cracks on
battery cell, and ultimately the module's reliability and user experience.
2. Do not use a sharp tool to score, cut, slice, or slash the module, especially the back plate.
3. Keep all electrical contacts and connectors clean and dry.

5.2 Pre-Installation Requirements

Ensure that modules comply with general system technical requirements and that other system components will
not damage the modules mechanically or electrically.
Modules can be connected in series to increase voltage or in parallel to increase current. In a series connection, the
positive terminal of one module is transferred to the negative terminal of the second module. In a parallel connec-
tion, the positive terminals of one module and the second module are connected, so are their negative terminals.
A series connection is shown in the diagram:
3