Maintenance - EcoFlow 100 W Rigid Solar Panel Manual De Instrucciones

Can I connect 100 W Solar Panels in series?
Yes, but this is not recommended. Please read the instructions in the User Manual carefully, paying particular
attention to energy storage controller requirements and limitations on solar panel output, so as not to cause solar
panels with different currents to be used in series without releasing their power and creating a 1+1<2 effect.
Can I connect 100 W Solar Panels in parallel?
Yes. Connecting panels in parallel increases power through doubling the current. The maximum number of 100
W panels allowed in a parallel connection depends on the controller and energy storage equipment of your
recreational vehicle. Please ensure that the energy storage system used in your vehicle supports a higher input
current, and you should use wires with a diameter suitable to the output current to securely connect the panels in
parallel.
Do I need to clean the 100 W Solar Panel regularly?
Yes. There can be a lot of dust and foreign objects on the surface of the solar panel after the panel has been used
outdoors for a long time, which block the light to a certain extent, reducing the power output. Regular cleaning can
help keep the surface of the solar panel clean and free from obstructions and generate a higher power output.

9. Maintenance

We recommend that you carry out the following maintenance to ensure optimal performance of the module:
1. Clean the glass surface of the module with water and a soft sponge or cloth when necessary. Stubborn dirt can
be removed with mild detergent. Avoid using sharp and/or hard cleaning tools. It is recommended that you only
clean in the morning and evening when the sun is weak [irradiance ≤200 W/m
2. Inspect electrical and mechanical connections every six months to confirm that they are clean, secure and
undamaged.
3. Prevent leaves and other objects from covering the surface of the solar panel. Partially shading the solar panel
will not only affect the efficiency of power generation, but may also cause excessive current at some places and
burn out the components.
In case of any issues, always have a qualified expert investigate and follow the maintenance instructions for all
components used in the system, such as brackets, charge regulators, inverters, batteries, etc.
11
2 2
(18.6 W/ft )].