Operating Your Fan - HAMPTON BAY 58004 Guía De Uso Y Mantenimiento

Assembly - Upper Bulb Replacement
12
Lighted housing bulb replacement
WARNING: To avoid accidental burning of the skin, allow the
bulbs to cool completely before touching or replacing the
bulbs.
WARNING: Remember to disconnect the power at the circuit
breaker/fuse box.
□
Remove the two screws (UU) on the same side of the
access cover (VV) that secure the access cover (VV) in the
fan top housing. Do not remove the one scew on the other
side of the access cover (VV).
□
Lift the access cover (VV) to expose the bulb (WW).
□
Replace the bulb (WW) with 7W, 120VAC candelabra base
bulb only.
□
Re-attached the access cover (VV) to the fan top housing
using the two screws (UU) removed in the first step.

Operating your Fan

WARNING: To reduce the risk personal injury. Do not bend the
blade holders while installing, balancing the blades, or cleaning
the fan. Do not insert objects between rotating blades.
Turn on the power and check the operation of the fan. The pull
chain controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depend
on factors such as the room size, ceiling height, and number of
fans.
The slide switch controls the direction of the blades: forward
(switch left) or reverse (switch right).
NOTE: Wait for the fan to stop before reversing the direction of
blade rotation.
Warm weather - (Forward) A downward airflow creates a cooling ef-
fect. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of
the ceiling. This allows you to set your heating unit on a cooler set-
ting without affecting your comfort.
UU
VV
WW
13
Please contact 1-877-527-0313 for further assistance.
HAMPTONBAY.COM