Silvercrest SBV 40 A1 Instrucciones De Utilización Y De Seguridad página 17

Ensure the rated voltage shown on
the rating label corresponds with
the voltage of the power supply .
Do not operate any product with
a damaged power cord or plug,
when the product malfunctions
or has been damaged in any
manner .
Only use the product in dry
indoor rooms .
Do not operate the product with
wet hands or while standing on a
wet floor . Do not touch the power
plug with wet hands .
Protect the product against heat .
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances .
Do not insert fingers or foreign
objects in any opening of the
product and do not obstruct the
air vents .
No action is needed from users to
shift the product between 50 and
60 Hz . The product adapts itself
for both 50 and 60 Hz .
18 GB/IE
Regularly check the power plug
and power cord for damage .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard .
Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally .
If the power cord should overheat,
stop using the product and
disconnect the product from the
electrical outlet .
Do not pull the power plug out of
the electrical outlet by the power
cord . Do not wrap the power cord
around the product .