3. Magnetic Headgear Clips - Connect the magnetic headgear clip to the magnetic
headgear clip receiver.
4a
4b
Optional: if your mask uses talon headgear clips, press into place to connect.
4. Headgear - Pull back the tabs to adjust the top and bottom side straps. The
headgear should fit loosely against your face. Do not overtighten fg.
5. Headgear - Pull the crown strap tab over to reduce leaks around your nose h.
5
6
8
7
6. Headgear - Make final adjustments by pulling back the tabs to evenly adjust the
top and bottom side straps. The headgear should feel snug, but not uncomfortably
tight fg.
Note: You should be able to fit one of your fingers underneath the top and
bottom side straps.
Using the mask:
1. Connect the flexible tubing (included with your CPAP or bi-level device) to the
quick release tube.
2. Lie down. Turn the therapy device on. Breathe normally. Keep your mouth slightly
open.
7