External Bidet Filter Installation - brondell Swash CL2200 Manual Del Propietário

PRODUCT INSTALLATION

External Bidet Filter Installation

NOTE: Customers with hard water, well
water, and softened water can extend
the life of their bidet seat by purchasing
and installing an external inline water
filter to be used with the bidet seat. The
bidet filter should be changed every 6
months and can be purchased online at
brondell.com.
1. Turn off water supply valve and flush toilet
a. Turn water valve off to stop the flow of
water.
b. Flush toilet and hold down handle to
completely empty tank.
2. Disconnect the bidet hose from the T-valve
Step 2
3. Connect the female end of the Swash filter
to the open T-valve connection
Step 3
4. Connect the bidet hose to the male end of
the Swash filter
Step 4
5. Turn the toilet water supply valve back on
FLOW
(optional, not included)
FLOW
15