Error Code - Barazza 1PIDC30N Manual De Instalacion Y Uso

• Error Code:

Error
Meaning
Code
Overheat of temperature
E2
sensor for cooking zone
E3
Wrong pot
E4
Configuration error
E5
No communication betwe-
en User Interface and
Induction Generator
Possible
Behavior
Corresponding Empty cookware
cooking zone is
turned OFF
Wrong cookware
Pot or glass tempe-
rature is too high.
Electronic temperature
Corresponding Cookware is losing its
cooking zone(s) magnetic characteri-
is/are turned OFF
Internal error in genera-
Pot creates on the
module an improper
operating point which
can destry devices, e.g
Cooking zone Induction module is not
cannot be turned configured yet
ON
Induction module confi-
guration data error
Cooking zone LIN cabling or power
cannot be turned supply cabling defective
ON (e. g. missing line
No mains voltage on
Internal error in genera-
tor's or filter's circuitry
(Mixed version) HiLight
Relay Voltage Error -
Defect hardware device
Error configuration data
29
Remedy
Causes
Do not heat-up empty
Use appropriate
Cool down system
too high
Use appropriate
stics
Contact technical
tor's circuitry
1. The error is auto-
matically cancelled
after 8s and the
cooking zone can be
IGBT. used again. in case
of further upcoming
errors the pots have
to be changed.
2. Contact technical
Contact technical
Erase and re-configu-
re cooking zone.
Contact technical
Contact technical
conductor)
Contact technical
slave boars
Contact technical
Contact technical
Contact technical
EN
pots
cookware
cookware
support
support.
support.
support.
support.
support.
support.
support.
support.