Example For Wheel Clamp Module Control List Of Tolerance Values; Tolerance List Of Manufacturers - Hella Gutmann Radaufnehmer Control Instrucciones De Operación

Hella Gutmann
12. Read the value from the scale.
13. Switch off the laser beam of the laser module with the switch.
Compare the value read from the scale with the tolerance values indicated for the tested vehicle model. Hella Gutmann
Solutions edits and regularly actualizes a list with the tolerance values.

3.2.1. Example for Wheel Clamp Module Control List of Tolerance Values

Manufacturer
Alfa Romeo
Alfa Romeo
Audi
Audi
Audi
Audi
Audi
Example: A:
Audi A3 MY 2021
Displayed value in wheel clamp module Control = 2.5
Result:
The rear axle is within the permissible tolerance. The basic setting of the driver assist systems can be performed.
Example B:
Audi A3 MY 2021
Displayed value in wheel clamp module Control = 10
Result:
The rear axle is outside the permissible tolerance. The basic setting of the driver assist systems cannot be performed. The
rear axle geometry needs to be checked.

3.3. Tolerance List of Manufacturers

Call up the list with the tolerance values under https://www.hella-gutmann.com/de/manuals#74|30|95|5.
You can also call up the list with tolerance values with the following QR code:
Radaufnehmer Control
Model
Giulia
Stelvio
A1 (GB)
A3 (8V)
A3 (8Y)
A4 (8K)
A4 (8W)
Working with the Wheel Clamp Module Control | 3.
Year
2016-2017
2017-2017
2018-
2012-
2020-
2008-2015
2015-
Permissible scale value
0-12.75
0-12.75
0-7.3
0,7,4
0-7.5
0-8
0-8
25