Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
FEATURE DETAILS
3
13
10
12
6
1
4
NOTE: There are no user-serviceable parts inside meter.
1.
2000 count LCD display
2.
Function selector switch
3.
Clamp
4.
"COM" jack
5.
"VΩ" jack
6.
Backlight button
7.
"RANGE" button
6
14
11
9
8.
"MAX" (Maximum) button
9.
Data Hold button
10.
Clamp trigger
11.
Arrow markings
12.
"SEL/NCV" button
13.
NCV Light
14.
NCV Sensing Antenna
ON/OFF
To power ON the meter, rotate the Function Selector switch
the OFF setting to any measurement setting. To power OFF the meter,
rotate the Function Selector switch
Power Off icon
will automatically power OFF after 10 minutes of inactivity. If the meter
automatically powers-OFF while in a measurement setting, press any
button to power the meter ON, or rotate Function Selector
to OFF, then power ON the meter. To deactivate Auto-Power OFF
functionality press and hold the "SEL/NCV" button
ON from the OFF setting. When Auto-Power OFF is deactivated, the
Auto-Power Off icon
SEL / NCV BUTTON (FOR NCV TESTING)
Press and hold the SEL/NCV button
Testing (NCV) mode to test for presence of AC voltage. The NCV
icon and "EF" will be present on the display. Approach the conductor
under test leading with the sensing antenna
AC voltage, the red NCV light
(beeps) will sound. Release the "SEL/NCV" button to exit NCV testing
mode. NOTE: Only voltages of 40V AC or greater will be detected.
2
BACKLIGHT
Press Backlight button symbol
7
The backlight does not automatically power OFF.
RANGE
8
The meter defaults to auto-ranging mode
automatically determines the most appropriate measurement range
for the testing that is being conducted. To manually force the meter to
measure in a different range, use the "RANGE" button
1. Press the "RANGE" button
range (
is deactivated on the LCD). Repeatedly press the
"RANGE" button
stopping once the desired range is reached.
2. To return to auto-ranging mode, press and hold the "RANGE"
5
button
for more than two seconds (
7
MAX
When the "MAX" button
Maximum value as the meter continues to take samples.
1. When measuring, press "MAX" button
maximum value. If a new maximum occurs, the display
updates with that new value.
2. Press "MAX" button
DATA HOLD
Press the Data Hold button
the display. Press again to return to live measuring mode.
FUNCTION BUTTONS
to the OFF setting. The Auto-
2
will be visible in the display. By default, the meter
will not be visible in the display.
to enter Non-contact Voltage
12
. In the presence of
14
13
will illuminate and audible signals
to turn ON or OFF the backlight.
6
. This mode
to manually select measurement
7
to cycle through the available ranges,
7
is pressed, the meter keeps track of the
8
8
again to return to normal measuring mode.
8
to hold the current measurement on
9
from
2
switch
2
before powering
12
.
7
is reactivated).
to display the
7
Publicidad
Tabla de contenido
