Technical Data - stayer VAC2030 Manual De Instrucciones

Container
Wipe out the container 9 from time to time with a commercially
available, non-scouring cleaning agent and allow to dry.
Repair service
Our after-sales service responds to your questions conceming
maintenance and repair ofyour product as well as spare parts.
Exploded views and information on spare parts can also be
found under: info@grupostayer.com
Our customer consultants answer your questions conceming
best buy, application
accessories.
Disposal and recycling
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household
waste!
According the European Guideline 2012/19/UE
for Waste Electrical and Electronic Equipment
and its implementation into national right,power
tools that are no longer usable must be collected
separately and disposed of in an environmentally correct
manner.
Subject to change wlthout notlce.
6. Regulations

6.1 Technical Data

= Power input.
= Suction capacity.
= Container capacity.
= Flow.
= Cable length.
= Pipe diameter.
= Weight.
L = Sound power level.
WA
L = Sound pressurelevel.
PA
= Vibration.
and adjustment of productsand
ENGLISH
18
The values given are valid for nominal voltages [U] 230/240 V
~ 50/60 Hz - 110/120 V ~ 60Hz. For lower voltage and models
for specific countries, these values can vary. Please observe
the article number on the type plate of your machine. The
trade names of the individual machines may vary.
Noise Vibration Information
Measured values determined according to EN 62841-1
Wear hearing protection!
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 62841-1 and may be used to compare one tool
with another. lt may be used for a preliminaryassessment of
exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications,with different accessories or poorly maintained,
the vibration emission may differ. This may significantly
increase the exposure leveloverthe totalworking period.
An estimation of the levelof exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce theexposure leveloverthetotal working
period.
ldentify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories,keepthe hands warm,organisationof work
pattems.
18