Heating Liquids (Steam Function) - Klarstein LIBEICA Manual De Instrucciones

The hot water function can also be used to cool down the appliance quickly.
Note: Take care when using the appliance as there are hot appliance
components (especially the water outlet (filter holder), hot water nozzle and
steam line). Do not place your hands on the unit when using it.

HEATING LIQUIDS (STEAM FUNCTION)

1. Use a stainless steel cup. Fill it halfway with cold liquid.
Note: Use a stainless steel cup with a diameter of at least 70 mm, otherwise the
liquid could overflow when steam escapes.
2. Touch the steam button to start preheating. The buttons for one and two cups
of coffee light up continuously in red and the steam indicator starts flashing
red. As soon as the steam indicator lights up continuously in white, preheating
is complete.
3. Place an empty cup under the steam outlet and make sure that the steam
nozzle is below the surface of the liquid.
4. Open the steam knob and let the steam flow into the liquid.
5. Close the steam knob as soon as the desired temperature has been reached.
No more steam will come out.
Note: Clean the steam outlet and steam line as soon as steam has stopped
coming out. Make sure that no milk is left in the steam lines and on the steam
outlet, otherwise it could deposit on the walls of the lines and dry out. Please
note that the appliance will still be very hot immediately after use. There is a risk
of scalding.
EN
25