System Settings - Roadstar RCR-779D+ Manual De Instrucciones

3 English
INFO
When the radio station is playing, press the [INFO] button (4) repeatedly to cycle through
the information broadcasted by the radio as follow:
UNDER DAB
DLS (Dynamic Label Segmenting): Radio text broadcasted from the DAB station such as
the news, songs being played...etc.
PTY (Programme Type): shows which type of programme you are listening to, "Music",
"Talk", "News" etc. If there is no information, it will display "Program Type".
Channel/Frequency: The frequency of DAB is displayed such as "11C 220.352MHz".
Audio info: The display shows the digital audio bit rate of the current reception.
Signal error: The signal strength is displayed graphically.
Time/Date: The time and date are set automatically.
UNDER FM
RT (Radio text): Text broadcasted from the FM station
Program type: shows which type of programme you are listening to.
Time/Date: The time and date are set automatically.
Frequency: the FM frequency for the radio station in playing.
Mono / Stereo: Automatic switching between mono and stereo reception.

SYSTEM SETTINGS

In FM / DAB mode there is an option menu.
Press and hold [MENU] (4) to access to the options.
Press the [TUNE -/+] buttons (5/6) to navigate into the options.
Press [ENTER] (3) to select the options.
DRC (Dynamic Range Compression): This function reduces the differences between te
loudes and quietest audio being broadcast.
PRUNE: Removes all invalid stations indicated in the station list with a "?" in front of the
station name.
EQ: press [EQ] button (10) to change in flat, rock, pop, jazz, classic.
SYSTEM SETTINGS menu you can choose:
TIME:
(to confirm press the [ENTER] (3) button each time )
Press and hold [MENU] (2) to access to the menu;
Press the [TUNE -/+] buttons (5) to select "System SETTINGS";
Press the [TUNE -/+] buttons (5/6) to select "Set Time/Date";
Press the [TUNE -/+] buttons (5/6) to adjust the hour;
Press the [TUNE -/+] buttons (5/6) to adjust the minutes;
Press the [TUNE -/+] buttons (5/6) to set Date;
Set 12/24 Hour: Press the [TUNE -/+] buttons (5/6) to set 12 or 24hour;
Set Date format: Press the [TUNE -/+] buttons (5/6) to set DD-MM-YYYY or MM-DD-
YYYY.
ALARM: Select Alarm 1 or 2;
Press [ENTER] button (3)to run Alarm wizard.
Press the [TUNE -/+] buttons (5/6) to select "On or OFF;
Confirm with the [ENTER] button (3);
You navigate in this menu with [TUNE -/+] buttons (5/6) , Confirm with the [ENTER] but-
ton (3);