Using Bi-Amp Output Mode - Esoteric S-05 Manual Del Usuario

Connections (continued)

Using BI-AMP output mode

This unit can be used as a mono bi-amplifier.
Set the OUTPUT MODE switches on the units for the L and R channels
to BI-AMP.
In BI-AMP mode, use two of these units for stereo playback.
What is bi-amp connection?
This method operates amplifiers independently for low-frequency
and high-frequency speaker units.
NOTE
Sound input through the analog INPUTS L connectors will be output
from both the L and R SPEAKER terminals.
Speaker (R)
HF
LF
c
Wall outlet
14
Connect using a set
of only one type.
Set INPUT SELECTOR
to the type of
connectors being used.
R L
XLR pin assignment
PREOUT
1. COMMON
2. HOT (+)
3. COLD (−)
Preamplifier that
supports ES-LINK Analog
V
ATTENTION
o Connection for bi-amplification is not possible with speakers that
do not have both low frequency (LF) and high frequency (HF)
terminals.
o When using bi-amp connections, remove speaker terminal links,
and disconnect the connections between speaker ¥ terminals
and between ^ terminals.
o Do not connect anything to the unit's analog INPUTS R connec-
tors. Doing so could result in damage.
Speaker (L)
HF
LF
R
PREOUT
Preamplifier
L
c
Wall outlet