Using Btl Output Mode - Esoteric S-05 Manual Del Usuario

Using BTL output mode

This unit can be used as a mono amplifier.
Set the OUTPUT MODE switches on the units for the L and R channels
to BTL.
In BTL mode, use two of these units for stereo playback.
Speaker (R)
c
Wall outlet
Preamplifier that
supports ES-LINK Analog
Connect using a set
of only one type.
Set INPUT SELECTOR to
the type of
connectors being used.
R L
PREOUT XLR pin assignment
1. COMMON
2. HOT (+)
3. COLD (−)
NOTE
Sound input through the analog audio INPUTS R connectors will
be output from both the L and R SPEAKER terminals with opposite
polarity.
ATTENTION
o Connect speakers to SPEAKER R + (BTL +) and SPEAKER L + (BTL −).
o Do not connect anything to the unit's analog INPUTS L connec-
tors. Doing so could result in damage.
Speaker (L)
R L
PREOUT
Preamplifier
c
Wall outlet
13