nedis ANIR2512GY700 Guia De Inicio Rapido página 8

ANIR2512GY700_MAN_COMP_print_1022.indd 8 ANIR2512GY700_MAN_COMP_print_1022.indd 8
manual of your STB for coaxial cable powering
function).
4. Adjust the antenna (turn around the antenna
body in different direction or put it in vertical or
horizontal) in the best position that can receive
digital TV signal. (It is recommended to place the
antenna near the window where the digital TV
signal comes in).
5. Organize the coaxial cable for neat, tidy and safety.
Installation 2: powered by AC/DC
adapter (image C)
1. Take out the antenna main unit and accessories
from box.
2. Connect the coaxial cable with antenna and DTV
set-top-box or TV.
3. Connect the DTV set-top-box to your TV.
4. Connect the power adapter DC output jack to
the DC input connector of the antenna, and then
plug the AC/DC power adapter into the AC power
socket.
5. Adjust the antenna (turn around the antenna
body in different direction or put it in vertical or
horizontal) in the best position that can receive
digital TV signal. (It is recommended to place the
antenna near the window where the digital TV
signal comes in).
6. Organize the coaxial cable for neat, tidy and safety.
After the installation is finished, you can use your
4
set-top-box to check the signal strength and
quality. If you cannot have a steady picture, please
move the antenna to a better reception position.
When you find the best position, please fix it.
Please take reference of following 3 different
4
positioning way to fix the antenna.
Insert the desktop standing supporter for horizontal
or vertical reception (image D).
8
10-10-2022 08:38:52 10-10-2022 08:38:52