Specifications; Product Identification; Product Description; Supplied Parts - CAMPAGNOLA P8 Manual De Uso Y Mantenimiento

3

- SPECIFICATIONS

3.1 Product identification

The tool identification details are indicated on the plate (1).

3.2 Product description

The pneumatic chainsaw is a tool which is used for cutting and pruning orchards, vineyards, cytrus and olive trees and similar plants.
It can be supplied either with a 8" or with a 10" bar (10). It has an ergonomic handgrip (17) in resins and a motor body (24) in
light alloy.
The tool is endowed with an ON/OFF switch (18), an active safety device (20) on the operating lever (21) and an inertial chain
brake (28), which prevents the operator from dangerous kickback effects while working. This safety system stops the chain (11)
of the cutting bar (10) immediately.
The chainsaw can be connected with an extension pole (3) or (5).

3.3 Supplied parts

• Use & Maintenance Manual.
• Keys set.

3.4 Recommended use

The chainsaw has been created for cutting and pruning according to the above-described manners and limits.
WARNING!
• Any other use has to be considered improper and potentially dangerous for the operators' safety. This would
make any warranty claims void.
• If it is not used for the purposes it was designed for, the tool may cause serious injuries to personnel and bystand-
ers and damages to equipment and things.
25 - 120