Safety Symbols - Craftsman CX Serie Manual Del Operador

SAFETY SYMBOLS

This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before
attempting to assemble and operate.
Symbol
WARNING:
the warnings and instructions in this manual and on the machine .
SAFETY INSTRUCTIONS
READ THE OPERATOR'S MANUAL(S)
Read, understand, and follow all instructions in the manual(s) before attempting to assemble and
operate
WARNING— ROTATING BLADES
Keep hands out of inlet and discharge openings while machine is running . There are rotating blades
inside
WARNING— ROTATING BLADES
Keep hands out of inlet and discharge openings while machine is running . There are rotating blades
inside
WARNING— ROTATING AUGER
Do not put hands or feet near rotating parts, in the auger/impeller housing or chute assembly .
Contact with the rotating parts can amputate hands and feet .
WARNING—THROWN OBJECTS
This machine may pick up and throw and objects which can cause serious personal injury .
WARNING—GASOLINE IS FLAMMABLE
Allow the engine to cool at least two minutes before refueling .
WARNING— CARBON MONOXIDE
Never run an engine indoors or in a poorly ventilated area . Engine exhaust contains carbon
monoxide, an odorless and deadly gas .
WARNING— ELECTRICAL SHOCK
Do not use the engine's electric starter in the rain
WARNING— HOT SURFACE
Engine parts, especially the muffler, become extremely hot during operation . Allow engine and
muffler to cool before touching .
Your Responsibility—Restrict the use of this power machine to persons who read, understand and follow
Description
SAVE THESE INSTRUCTIONS!
6