Sharp UA-KCP100E Manual De Operación página 18

Wi-Fi FUNCTIONS (A1-A8)
Function
Wi-Fi adapter
ON/OFF
Wi-Fi connection
with a router
(with the WPS
Button)
Initialization of
Wi-Fi function
1.
Select " " by following Steps 1 - 3 on page 14.
2.
Press "Clean Ion Shower" Button to select Setting "
♪
3.
Complete
♪
～
1.
Select " " by following Steps 1 - 3 on page 14.
2.
After " " is displayed, press the WPS (Wi-Fi Protected Setup)
Button of the router.
Blink
Once connected, receiver level will be displayed.
A connection error is occuring if "
router is operating correctly and try again.
3.
Complete
♪
1.
Select " " by following Steps 1 - 3 on page 14.
2.
After " " is displayed press "Mode" Button.
An error is occurring if "
♪
3.
Complete
♪
EN-16
Setting
Wi-Fi OFF
Wi-Fi ON
NOTE
• When Setting number ("
changed, the square rotates on the display
until the setting is completed. When setting is
completed, " " is displayed.
weak
" is displayed. Please confirm that the
" is displayed. Please try again.
Initializing Complete
Blink
NOTE
• Please delete the device registration from the App
when initializing the air purifier which is already
connected to the Wi-Fi.
" or "
" or " ") is
Light up
strong
♪
～
".