Clean Ion Shower Mode - Sharp UA-KCP100E Manual De Operación

START/STOP
START
♪
NOTE
• When the product starts operation, the
operation starts in the previous mode it was
operated in.
CLEAN ION SHOWER
MODE
The product releases Plasamcluster ions at max
air flow for 10 minutes. After that, the air purifier
operates for 50 minutes on high fan speed.
NOTE
• When the operation finishes after 60 minutes,
the product will return to the prior operation
mode.
It is able to change to other modes during this
operation.
• The Plasmacluster ion cannot be turned "OFF".
STOP
♪
～
♪
EN-12
SELECT AIR VOLUME
AND MODE
♪ ♪
AUTO:
The fan speed is automatically controlled depending
on the six detections. (PM2.5 / Usual dust / Odour /
Temperature / Humidity / Light)
POLLEN:
The Sensitive Dust Sensor sensitivity is
automatically increased and the Sensitive Dust
Sensor quickly detects impurities such as dust and
pollen and cleans the air powerfully.
SLEEP:
The product will operate quietly, and the fan speed
will automatically switch depending on the amount
of impurities in the air and room brightness.
When the Light Control is set to "Auto", the Display
and Cleanliness Indicator will automatically go off.
AUTO
♪
POLLEN
♪
SLEEP
♪
LOW
♪
MED
♪
MAX